5LS189.6-1

Short description

Communication module	1x X2X Link master, 1x POWERLINK (V1/V2) managing or controlled node

General information

Ready relay	Normally open and normally closed contact, max. 30 VDC, max. 6 A
Status indicators	Status of the POWERLINK station, network activity, link/collision for IF2
Diagnostics
Bus function (IF2)	Yes, using LED status indicators and software
Data transfer (IF1)	Yes, using software
Station status (IF2)	Yes, using LED status indicators and software
Power consumption	4.0 W
Electrical isolation
IF1 - IF2	Yes
PC - IFx	Yes
Certifications
CE	Yes
UL	cULus E115267 Industrial control equipment

Controller

SRAM	1 MB, battery-backed

Interfaces

Interface IF1
Fieldbus	X2X Link master
Variant	4-pin male multipoint connector
Distance between 2 stations	Max. 100 m
Interface IF2
Fieldbus	POWERLINK (V1/V2) managing or controlled node
Type	Type 3
Variant	1x shielded RJ45 port
Line length	Max. 100 m between two stations (segment length)
Transfer rate	100 Mbit/s
Transfer
Physical layer	100BASE-TX
Half-duplex	Yes
Full-duplex	POWERLINK mode: No / Ethernet mode: Yes
Autonegotiation	Yes
Auto-MDI/MDIX	Yes

Operating conditions

Degree of protection per EN 60529	IP20 when installed

Ambient conditions

Temperature
Operation	0 to 55°C
Storage	-25 to 70°C
Relative humidity
Operation	0 to 95%, non-condensing

Mechanical properties

Note	Order 2x TB704 terminal blocks separately Lithium battery included in delivery
Slot	Standard PCI half-size module, Plug & Play
Installation in
B&R Automation PC	Yes
B&R Panel PC	Yes
Desktop PC	Yes

Material number:

5LS189.6-1

Description:

POWERLINK
X2X Link connection

Logic scanner, PCI half-size module, 1 POWERLINK (V1/V2) interface, managing or controlled node, 1 X2X Link master interface, electrically isolated, 1 MB SRAM (Automation Runtime), order 2x TB704 terminal blocks separately

Mandatory Accessories

Terminal blocks

0TB704.9	Accessory terminal block, 4-pin, screw clamp terminal block 2.5 mm²
0TB704.91	Accessory terminal block, 4-pin, push-in terminal block 2.5 mm²

Optional Accessories

Batteries

0AC201.91	Lithium batteries 4 pcs., 3 V / 950 mAh button cell
4A0006.00-000	Lithium battery, 3 V / 950 mAh, button cell

Automation Studio HW Upgrades	Version (Date)	Download
V2.7 HW Upgrade (5LS189.6-1)		EXE / 630 KB
V3.0 HW Upgrade (5LS189.6-1)		EXE / 630 KB
V4.0 HW Upgrade (5LS189.6-1)		EXE / 529 KB

E-CAD (Electro or EPLAN Templates)	Version (Date)	Download
APC EPLAN P8 from V2.4		EXE / 90 MB