Please choose country and language

Short description
Interfaces 1x RS232, 1x Ethernet, 1x POWERLINK V1/V2, 2x USB, 1x X2X Link
System module CPU
General information
Cooling Fanless with derating (see operational conditions)
Exchangeable fans for entire temperature range
Fan is monitored
B&R ID code 0x2164
Status indicators CPU function, overtemperature, Ethernet, POWERLINK, CompactFlash, battery
Diagnostics
Battery Yes, using status LED and software
CPU function Yes, using status LED
CompactFlash Yes, using status LED
Ethernet Yes, using status LED
POWERLINK Yes, using status LED
Overtemperature Yes, using status LED
Diagnostics - Fan Yes, using software
ACOPOS support Yes
Visual Components support Yes
Power consumption without memory card, interface module and USB 13.5 W
Internal power consumption of X2X Link and I/O power supply
Bus 1.42 W
Internal I/O 0.6 W
Additional power dissipation caused by actuators (resistive) [W] -
Electrical isolation
IF1 - IF2 Yes
IF1 - IF3 Yes
IF1 - IF4 No
IF1 - IF5 No
IF1 - IF6 Yes
IF2 - IF4 Yes
IF2 - IF5 Yes
IF3 - IF4 Yes
IF3 - IF5 Yes
IF4 - IF5 No
IF4 - IF6 Yes
IF5 - IF6 Yes
PLC - IF1 No
PLC - IF2 Yes
PLC - IF3 Yes
PLC - IF4 No
PLC - IF5 No
PLC - IF6 Yes
Certifications
CE Yes
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
DNV GL Temperature: B (0 - 55°C)
Humidity: B (up to 100%)
Vibration: B (4 g)
EMC: B (bridge and open deck)
KR Yes
EAC Yes
KC Yes
CPU and X2X Link power supply
Input voltage 24 VDC -15% / +20%
Input current Max. 2.2 A
Fuse Integrated, cannot be exchanged
Reverse polarity protection Yes
X2X Link power supply output
Nominal output power 7 W
Parallel connection Yes
Redundant operation Yes
Input I/O power supply
Input voltage 24 VDC -15% / +20%
Fuse Required line fuse max. 10 A (slow blow)
Output I/O power supply
Nominal output voltage 24 VDC
Permissible contact load 10 A
Power supply - General information
Status indicators Overload, operating status, module status, RS232 data transfer
Diagnostics
RS232 data transfer Yes, using status LED
Module run/error Yes, using status LED and software
Overload Yes, using status LED and software
Electrical isolation
I/O supply - I/O power supply No
CPU/X2X Link supply - CPU/X2X Link power supply Yes
Controller
CompactFlash slot 1
Real-time clock Nonvolatile, 1 s resolution, -20 to 20 ppm accuracy at 25°C
FPU Yes
Processor
Type Celeron 650
L2 cache 256 kB
L1 cache for data and program code 2x 16 Kb
Integrated I/O processor Processes I/O data points in the background
Modular interface slots 1
Remanent variables Max. 256 kB
Shortest task class cycle time 200 µs
Typical instruction cycle time 0.0034 µs
Data buffering
Battery monitoring Yes
Lithium battery At least 3 years
Standard memory
RAM 64 MB SDRAM
User RAM 1 MB SRAM
Interfaces
Interface IF1
Type RS232
Variant Contact via 12-pin terminal block TB12
Transfer rate Max. 115.2 kbit/s
Interface IF2
Type Ethernet
Variant Shielded RJ45
Line length Max. 100 m between 2 stations (segment length)
Transfer rate 10/100 Mbit/s
Interface IF3
Fieldbus POWERLINK V1/V2
Type 100 Base-T (ANSI/IEEE 802.3)
Variant Shielded RJ45
Line length Max. 100 m between 2 stations (segment length)
Transfer rate 100 Mbit/s
Interface IF4
Type USB 1.1
Variant Type A
Max. output current 0.5 A
Interface IF5
Type USB 1.1
Variant Type A
Max. output current 0.5 A
Interface IF6
Type X2X Link master
Quantity 1
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Installation elevation above sea level
0 to 2000 m No limitations
>2000 m Reduction of ambient temperature by 0,5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Horizontal mounting orientation 0 to 55°C, fanless: 0 to 45°C
Vertical mounting orientation 0 to 55°C, fanless operation not permitted
Derating -
Storage -25 to 70°C
Transport -25 to 70°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order application memory (CompactFlash) separately
Backup battery included in delivery
X20 locking plate (right) included in delivery
X20 terminal block (12-pin) included in delivery
Interface module slot covers included in the delivery
Dimensions
Width 150 mm
Height 99 mm
Depth 85 mm
Material number:
X20CP1486
Description:
  • Intel Celeron 650 Performance with additional I/O processor
  • Ethernet, POWERLINK and USB onboard
  • 1 slot for modular interface expansion
  • CompactFlash as removable application memory
  • Fan can be exchanged from the outside, tool-free
  • Extremely compact

The X20CP1486 is a high-performance CPU for the X20 System. This CPU can be used anywhere from high-end applications in machine manufacturing to demanding tasks in process control.

Ethernet and USB are onboard. In addition, the CPU has a POWERLINK connection for real-time communication. The only differences from the X20CP3486 are that the X20CP1486 only has one slot for interface modules and a smaller width.

Mandatory Accessories
CompactFlash cards
0CFCRD.0512E.01 CompactFlash 512 MB extended temp.
0CFCRD.2048E.01 CompactFlash 2048 MB extended temp.
5CFCRD.016G-06 CompactFlash 16 GB B&R (SLC)
5CFCRD.0512-06 CompactFlash 512 MB B&R (SLC)
5CFCRD.1024-06 CompactFlash 1 GB B&R (SLC)
5CFCRD.2048-06 CompactFlash 2 GB B&R (SLC)
5CFCRD.4096-06 CompactFlash 4 GB B&R (SLC)
5CFCRD.8192-06 CompactFlash 8 GB B&R (SLC)
Optional Accessories
Batteries
0AC201.91 Lithium batteries 4 pcs., 3 V / 950 mAh button cell
4A0006.00-000 Lithium battery, 3 V / 950 mAh, button cell
Other
X20AC0EF1 X20 CPU exchangable fan
Automation Studio HW Upgrades Version (Date) Download
V2.6 HW Upgrade (X20CP1486) EXE / 2 MB
V3.0 HW Upgrade (X20CP1486) EXE / 4 MB
V4.0 HW Upgrade (X20CP1486) EXE / 2 MB
Certificates Version (Date) Download
244665 CSA HazLoc Certificate of Compliance X20, X67 PDF / 56 KB
DNV GL Type Approval Certificate - X20 / Power Panel T30 PDF / 171 KB
E115267 UL CoC X20 PDF / 825 KB
FTZU 09 ATEX 0083X PDF / 697 KB
KR Type Approval Certificate MIL39390-AC003 (X20 System) PDF / 758 KB
Documentation Version (Date) Download
Datasheet X20CP1486 PDF / 4 MB
E-CAD (Electro or EPLAN Templates) Version (Date) Download
X20 EPLAN P8 from V2.4 EXE / 161 MB
M-CAD (Mechan. Templates) Version (Date) Download
3D File DXF/STEP X20 CPU modules X20CP1x8x ZIP / 81 KB
Dimensions PDF X20 CPU 1-Slot X20CP148x PDF / 5 KB

Please choose country and language

B&R Logo