Please choose country and language

Short description
Power supply module 24 VDC supply module for I/O and bus
General information
B&R ID code 0x2017
Status indicators Overload, operating state, module status
Diagnostics
Module run/error Yes, using status LED and software
Overload Yes, using status LED and software
Power consumption for X2X Link power supply 1.42 W
Power consumption
Internal I/O 0.82 W
Additional power dissipation caused by actuators (resistive) [W] -
Certifications
CE Yes
KC Yes
EAC Yes
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
X2X Link power supply input
Input voltage 24 VDC -15% / +20%
Input current Max. 0.7 A
Fuse Integrated, cannot be replaced
Reverse polarity protection Yes
X2X Link power supply output
Nominal output power 7 W
Parallel connection Yes
Redundant operation Yes
Overload characteristics Short circuit, temporary overload
Input I/O power supply
Input voltage 24 VDC -15% / +20%
Input current Max. 6 A
Fuse Integrated 6.3 A, slow-blow, can be replaced
Reverse polarity protection No
Output I/O power supply
Nominal output voltage 24 VDC
Behavior on short circuit Integrated fuse
Permissible contact load 6 A
Electrical properties
Electrical isolation
X2X Link supply isolated from X2X Link power supply

I/O supply not isolated from I/O power supply
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Installation elevation above sea level
0 to 2000 m No limitations
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Horizontal mounting orientation -25 to 60°C
Vertical mounting orientation -25 to 50°C
Derating See section "Derating"
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order 1x terminal block X20TB12 separately
Order 1x power supply bus module X20BM01 separately
Spacing 12.5+0.2 mm
Material number:
X20PS3310
Description:
  • Feed for X2X Link and internal I/O supply
  • Electrical isolation of feed and X2X Link supply
  • Redundancy of X2X Link supply possible by operating multiple supply modules simultaneously
  • Fuse for I/O supply integrated in module

The supply module is equipped with a feed for the X2X Link as well as the internal I/O supply. The module has an integrated replaceable fuse for the I/O supply.

Mandatory Accessories
Bus modules
X20BM01 X20 power supply bus module, 24 VDC keyed, internal I/O supply interrupted to the left
X20BM05 X20 power supply bus module, with node number switch, 24 VDC keyed, internal I/O supply interrupted to the left
Terminal blocks
X20TB12 X20 terminal block, 12-pin, 24 VDC keyed
Automation Studio HW Upgrades Version (Date) Download
V2.7 HW Upgrade (X20PS3310) EXE / 1 MB
V3.0 HW Upgrade (X20PS3310) EXE / 2 MB
V4.0 HW Upgrade (X20PS3310) EXE / 784 KB
Certificates Version (Date) Download
244665 CSA HazLoc Certificate of Compliance X20, X67 PDF / 56 KB
E115267 UL CoC X20 PDF / 825 KB
FTZU 09 ATEX 0083X PDF / 697 KB
Documentation Version (Date) Download
Data sheet X20(c)PS3310 PDF / 223 KB
X20 System User´s Manual PDF / 50 MB
E-CAD (Electro or EPLAN Templates) Version (Date) Download
X20 EPLAN P8 from V2.4 EXE / 161 MB
M-CAD (Mechan. Templates) Version (Date) Download
3D File DXF/STEP X20 Electronic module ZIP / 10 KB
3D File STEP X20 I/O-Slice ZIP / 872 KB
Dimensions PDF X20 Electronic module PDF / 3 KB

Please choose country and language

B&R Logo