Please choose country and language

Short description
Power supply module 24 VDC supply module for internal I/O supply
General information
B&R ID code 0x2016
Status indicators Operating state, module status
Diagnostics
Module run/error Yes, using status LED and software
Power consumption
Bus 0.2 W
Internal I/O 0.82 W
Additional power dissipation caused by actuators (resistive) [W] -
Certifications
CE Yes
KC Yes
EAC Yes
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
Input I/O power supply
Input voltage 24 VDC -15% / +20%
Input current Max. 6 A
Fuse Integrated 6.3 A, slow-blow, can be replaced
Reverse polarity protection No
Output I/O power supply
Nominal output voltage 24 VDC
Behavior on short circuit Integrated fuse
Permissible contact load 6 A
Electrical properties
Electrical isolation I/O supply not isolated from I/O power supply
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Installation elevation above sea level
0 to 2000 m No limitations
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Horizontal mounting orientation -25 to 60°C
Vertical mounting orientation -25 to 50°C
Derating -
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order 1x X20TB12 terminal block separately
Order 1x X20BM01 supply bus module separately
Spacing 12.5+0.2 mm
Material number:
X20PS2110
Description:
  • 24 VDC supply module for internal I/O supply
  • Fuse for I/O power supply integrated in module

The power supply module is used for the internal I/O power supply. The module has an integrated replaceable fuse for the I/O power supply.

Mandatory Accessories
Bus modules
X20BM01 X20 power supply bus module, 24 VDC keyed, internal I/O supply interrupted to the left
X20BM05 X20 power supply bus module, with node number switch, 24 VDC keyed, internal I/O supply interrupted to the left
Terminal blocks
X20TB12 X20 terminal block, 12-pin, 24 VDC keyed
Automation Studio HW Upgrades Version (Date) Download
V2.7 HW Upgrade (X20PS2110) EXE / 1,016 KB
V3.0 HW Upgrade (X20PS2110) EXE / 1 MB
V4.0 HW Upgrade (X20PS2110) EXE / 640 KB
Certificates Version (Date) Download
244665 CSA HazLoc Certificate of Compliance X20, X67 PDF / 56 KB
E115267 UL CoC X20 PDF / 825 KB
FTZU 09 ATEX 0083X PDF / 697 KB
Safe cutoff of potential groups PDF / 147 KB
Documentation Version (Date) Download
Data sheet X20(c)PS2110 PDF / 179 KB
X20 System User´s Manual PDF / 50 MB
E-CAD (Electro or EPLAN Templates) Version (Date) Download
X20 EPLAN P8 from V2.4 EXE / 161 MB
M-CAD (Mechan. Templates) Version (Date) Download
3D File DXF/STEP X20 Electronic module ZIP / 10 KB
3D File STEP X20 I/O-Slice ZIP / 872 KB
Dimensions PDF X20 Electronic module PDF / 3 KB

Please choose country and language

B&R Logo