Please choose country and language

Short description
Interfaces 1x Ethernet, 2x USB, 1x X2X Link
System module CPU
General information
Cooling Fanless
B&R ID code 0xE94F
Status indicators CPU function, Ethernet
Diagnostics
CPU function Yes, using LED status indicator
Ethernet Yes, using LED status indicator
Overtemperature Yes, using software
Power consumption 2.2 W
Controller redundancy possible No
ACOPOS support Yes
Visual Components support Yes
Additional power dissipation caused by actuators (resistive) [W] -
Certifications
CE Yes
UL cULus E115267
Industrial control equipment
EAC Yes
Controller
Real-time clock Retention for at least 300 hours, typ. 1000 hours at 25°C, 1 s resolution, -18 to 28 ppm accuracy at 25°C
FPU Yes
Processor
Type ARM Cortex-A9
Clock frequency 166 MHz (comp.)
L1 cache
Data code 32 kB
Program code 32 kB
L2 cache 512 kB
Integrated I/O processor Processes I/O data points in the background
Remanent variables 8 kB FRAM, retention > 10 years
Shortest task class cycle time 4 ms
Typical instruction cycle time 0.0446 µs
Standard memory
RAM 128 MB DDR3 SDRAM
Application memory
Type 256 MB eMMC flash memory
Data retention 10 years
Writable data amount
Guaranteed 40 TB
Results for 5 years 21.9 GB/day
Guaranteed erase/write cycles 20,000
Error-correcting code (ECC) Yes
Interfaces
Interface IF2
Signal Ethernet
Variant 1x RJ45 shielded
Line length Max. 100 m between 2 stations (segment length)
Transfer rate 10/100 Mbit/s
Transfer
Physical layer 10BASE-T/100BASE-TX
Half-duplex Yes
Full-duplex Yes
Autonegotiation Yes
Auto-MDI/MDIX Yes
Interface IF4
Type USB 1.1/2.0
Variant Type A
Max. output current 0.2 A
Interface IF5
Type USB 1.1/2.0
Variant Type A
Max. output current 0.2 A
Interface IF6
Fieldbus X2X Link master
On base module
X20BB52, X20BB62 and X20BB72 Compact-S CPU base module with integrated RS232 interface
X20BB57, X20BB67 and X20BB77 Compact-S CPU base module with integrated RS232 and CAN bus interface
Electrical properties
Electrical isolation Ethernet (IF2) isolated from other interfaces and PLC
X2X (IF6) isolated from other interfaces and PLC: Yes, with X20PS9600 / No, with X20PS9602
USB (IF4, IF5) not isolated from each other and PLC
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Installation elevation above sea level
0 to 2000 m No limitation
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Horizontal mounting orientation -25 to 60°C
Vertical mounting orientation -25 to 50°C
Derating See section "Derating" of the X20PS960x data sheet.
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order 1x terminal block X20TB12 separately.
Order 1x power supply module X20PS9600 or X20PS9602 separately.
Order 1x Compact-S CPU base X20BB5x separately.
Spacing
X20BB5x 37.5+0.2 mm
Material number:
X20CP0410
Description:
  • ARM Cortex-A9 processor with 166 MHz (compatible) and integrated I/O processor
  • Onboard Ethernet
  • 2x onboard USB
  • 128 MB DDR3 SDRAM
  • 256 MB onboard flash drive
  • Fanless
  • No battery
  • Extremely compact

The CPUs in the X20 Compact-S family are both powerful and compact. The fanless, battery-free design of these CPUs means they are completely maintenance-free.

The X20CP0410 is equipped with an ARM Cortex A9 166 MHz (compatible) processor, 128 MB RAM and 256 MB built-in flash drive. The FRAM for saving remanent variables has 8 kB available.

With Ethernet, USB and RS232, the CPU offers ample communication options. A CAN interface is also available as an option.

Mandatory Accessories
System modules for Compact-S CPUs
X20BB52 X20 Compact-S bus base, for Compact-S CPU and Compact-S CPU power supply module, base for integrated RS232 interface, X20 connection, X20 end cover plates (left and right) X20AC0SL1/X20AC0SR1 included
X20BB57 X20 Compact-S bus base, for Compact-S CPU and Compact-S CPU power supply module, base for integrated RS232 and CAN bus interface, X20 connection, X20 end cover plates (left and right) X20AC0SL1/X20AC0SR1 included
X20PS9600 X20 power supply module, for Compact-S CPU and internal I/O power supply, X2X Link power supply
X20PS9602 X20 power supply module, for Compact-S CPU and internal I/O power supply, X2X Link power supply, power supply not electrically isolated
Terminal blocks
X20TB12 X20 terminal block, 12-pin, 24 VDC keyed
Automation Studio HW Upgrades Version (Date) Download
V4.3 HW Upgrade (X20CP0410) EXE / 2 MB
Certificates Version (Date) Download
E115267 UL CoC X20 PDF / 825 KB
Documentation Version (Date) Download
Datasheet X20CP04xx PDF / 1 MB
X20 System User´s Manual PDF / 50 MB
E-CAD (Electro or EPLAN Templates) Version (Date) Download
X20 EPLAN P8 from V2.4 EXE / 161 MB
M-CAD (Mechan. Templates) Version (Date) Download
3D File DXF/STEP X20CP041x ZIP / 2 MB

Please choose country and language

B&R Logo