Please choose country and language:

General information
B&R ID code 0xB1D3
Configuration software Automation Studio (version 3.0.81 and higher) / SYCONnet
Certifications
CE Yes
UL cULus E115267
Industrial control equipment
HazLoc cULus HazLoc E180196
Industrial control equipment
for hazardous locations
Class I, Division 2, Groups ABCD
GOST-R Yes
Controller
Processor netX 100
Dual-port memory 64 kB
Fieldbus
Type DeviceNet master
Design 5-pin, male
Transfer rate Max. 500 kbaud
Slaves Max. 63
Cyclic data Max. 7168, 255 bytes/slave
Acyclic data Get/Set_Attribute max. 240 bytes/request
I/O connections Poll, Change-of-State, Cyclic, Bit-Strobe
Functions UCMM supported
Electrical characteristics
Nominal voltage +3.3 V ±5%
Nominal current 650 mA
Environmental conditions
Temperature
Operation 0 to 55°C
Mechanical properties
Dimensions
Width 120 mm
Height 73.2 mm
Depth 18.5 mm
Slot Standard PCI half-size module, Plug & Play
Installation in
B&R Automation PC Yes
B&R Panel PC Yes
Desktop PC Yes
Material number:
5ACPCI.XDNM-00
Description:
PCI DeviceNet master

The 5ACPCI.XDNM-00 is equipped with a DeviceNet master interface and can therefore be used as a master in a DeviceNet network. Data is exchanged via the dual port memory.

Automation Studio HW Upgrades Version (Date) Download
V3.0 HW Upgrade (5ACPCI.XDNM-00) / 602 KB
V4.0 HW Upgrade (5ACPCI.XDNM-00) / 581 KB
Documentation Version (Date) Download
B&R Hilscher Fieldbus cards PDF / 3 MB
Datasheet 5ACPCI.XDNM-00 PDF / 523 KB
Firmware Upgrades Version (Date) Download
Hilscher firmware (5ACPCI.XDNM-00) / 220 KB

Please choose country and language:

B&R Logo