Short description
| Communication module | 2x CAN bus |
General information
| B&R ID code | 0xA009 |
| Status indicators | Data transfer, terminating resistor, operating status, module status |
| Diagnostics | |
| Module run/error | Yes, using status LED and software |
| Data transfer | Yes, using status LED |
| Terminating resistor | Yes, using status LED |
| Power consumption | |
| Bus | 0.01 W |
| Internal I/O | 1.5 W |
| Additional power dissipation caused by actuators (resistive) [W] | - |
| Certifications | |
| CE | Yes |
| ATEX |
Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X |
| UL |
cULus E115267 Industrial control equipment |
| HazLoc |
cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
| EAC | Yes |
| KC | Yes |
Interfaces
| Interface IF1 | |
| Signal | CAN bus |
| Variant | Connection made using 12-pin X20TB12 terminal block |
| Max. distance | 1000 m |
| Transfer rate | Max. 1 Mbit/s |
| Terminating resistor | Integrated in the module |
| Controller | SJA 1000 |
| Interface IF2 | |
| Signal | CAN bus |
| Variant | Connection made using 12-pin X20TB12 terminal block |
| Max. distance | 1000 m |
| Transfer rate | Max. 1 Mbit/s |
| Terminating resistor | Integrated in the module |
| Controller | SJA 1000 |
Electrical properties
| Electrical isolation | CAN (IF1, IF2) isolated from each other, from bus and I/O power supply |
Operating conditions
| Mounting orientation | |
| Horizontal | Yes |
| Vertical | Yes |
| Installation elevation above sea level | |
| 0 to 2000 m | No limitations |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP20 |
Ambient conditions
| Temperature | |
| Operation | |
| Horizontal mounting orientation | -25 to 60°C |
| Vertical mounting orientation | -25 to 50°C |
| Derating | See section "Derating" |
| Storage | -40 to 85°C |
| Transport | -40 to 85°C |
| Relative humidity | |
| Operation | 5 to 95%, non-condensing |
| Storage | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
Mechanical properties
| Note |
Order 1x X20TB12 terminal block separately Order 1x X20BM11 bus module separately |
| Pitch | 12.5 +0.2 mm |
Material number:
X20CS2770Description:
- 2 CAN bus interfaces for serial, remote connection of complex devices to the X20 system
- Integrated terminating resistors
In addition to the standard I/O, complex devices often need to be connected. The X20 CS communication modules are intended precisely for cases like this. As normal X20 electronics modules, they can be placed anywhere on the remote backplane.
Mandatory Accessories
| Automation Studio HW Upgrades | Version (Date) | Download |
|---|---|---|
| V2.7 HW Upgrade (X20CS2770) | EXE / 2 MB | |
| V3.0 HW Upgrade (X20CS2770) | EXE / 4 MB | |
| V4.0 HW Upgrade (X20CS2770) | EXE / 2 MB |
| Certificates | Version (Date) | Download |
|---|---|---|
| 244665 CSA HazLoc Certificate of Compliance X20, X67 | PDF / 56 KB | |
| E115267 UL CoC X20 | PDF / 847 KB | |
| FTZU 09 ATEX 0083X | PDF / 697 KB | |
| X20, X67 KC certificates | PDF / 6 MB |
| Documentation | Version (Date) | Download |
|---|---|---|
| Data sheet X20CS2770 | PDF / 831 KB | |
| X20 System User´s Manual | PDF / 56 MB |
| E-CAD (Electro or EPLAN Templates) | Version (Date) | Download |
|---|---|---|
| X20 EPLAN P8 from V2.4 | EXE / 161 MB |
| M-CAD (Mechan. Templates) | Version (Date) | Download |
|---|---|---|
| 3D File DXF/STEP X20 Electronic module | ZIP / 10 KB | |
| 3D File STEP X20 I/O-Slice | ZIP / 872 KB | |
| Dimensions PDF X20 Electronic module | PDF / 3 KB |
