Short description
| Accessories | POWERLINK hybridkabel, M12, Y-kodet |
General information
| Cable cross section | ((4x 0.15 mm²) + (4x 0.6 mm²)) |
| Durability |
Flammehæmmer pr. UL 1581, sektion 1061 Oliebestandig pr. IEC 60811-2-1 og VDE 0282 del 10
|
| Certification |
CE
|
Cable construction
| Supply lines | |
| Quantity | 4 |
| Wire insulation | PP |
| Wire colors | Hvid, blå, rød, sort |
| Variant | CuZn-kontakt med Ni / Au-kontaktfladen |
| Cross section | 0.6 mm² |
| Signal line | |
| Quantity | 4 |
| Wire insulation | PP |
| Wire colors | Hvid/orange, orange, hvid/grøn, grøn |
| Variant | CuZn-kontakt med Ni / Au-kontaktfladen |
| Cross section | 0.15 mm² |
| Cable stranding | Yes |
| Cable shield | Indvendig fletning af kobbertråd |
| Outer jacket | |
| Material | PUR (halogenfri, slidstærkt) |
| Color | Sort RAL 9005 |
| Labeling | B&R-materialenummer, produktionsuge, produktionsland, UL E-filnummer |
Connector
| Type | 2x M12 SPEEDCON, Y-kodet, han |
| Mating cycles | Mindst 100 |
| Contacts | 8 (4 strømforsyning og 4 signalkontakter) |
Electrical properties
| Nominal voltage | Maks. 50 VDC (spidsværdi) |
| Nominal current |
4 A strømforsyningslinie 0,5 A signallinje
|
| Test voltage | |
| Wire - Wire | 1500 V (50 Hz, 1 min.) |
| Wire - Shield | 1500 V (50 Hz, 1 min.) |
| Transfer properties | Kategori 5 / klasse D op til 100 MHz pr. ISO/IEC 11801 |
| Transfer rate | 100 Mbit/s |
| Conductor resistance | |
| Supply lines | Max. 34,6 Ω/km |
| Signal line | Max. 280 Ω/km |
| Insulation resistance | ≥5 GΩ/km |
Operating conditions
| Degree of protection per EN 60529 | |
| Cables | IP67 |
| Male M12 connector | IP67 (tilsluttet og skruet ind) |
Mechanical properties
| Dimensions | |
| Length | 10,0 m |
| Diameter | 7,6 ±0,2 mm |
| Can be used in cable drag chains | |
| Drag chain data | |
| Acceleration | 3 m/s² |
| Flex cycles | 2,000.000 |
| Velocity | 3 m/s |
| Weight | Ca. 907 g |
Materialenummer:
VCA0Y0100Beskrivelse:
- POWERLINK hybridkabel - 10,0 m