X20cPS2110

Short description

Power supply module	24 VDC supply module for internal I/O supply

General information

B&R ID code	0xE23D
Status indicators	Operating state, module status
Diagnostics
Module run/error	Yes, using status LED and software
Power consumption
Bus	0.2 W
Internal I/O	0.82 W
Additional power dissipation caused by actuators (resistive) [W]	-
Certifications
CE	Yes
ATEX	Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X
UL	cULus E115267 Industrial control equipment
HazLoc	cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5
EAC	Yes

Input I/O power supply

Input voltage	24 VDC -15% / +20%
Input current	Max. 6 A
Fuse	Integrated 6.3 A, slow-blow, can be replaced
Reverse polarity protection	No

Output I/O power supply

Nominal output voltage	24 VDC
Behavior on short circuit	Integrated fuse
Permissible contact load	6 A

Electrical properties

Electrical isolation	I/O supply not isolated from I/O power supply

Operating conditions

Mounting orientation
Horizontal	Yes
Vertical	Yes
Installation elevation above sea level
0 to 2000 m	No limitations
>2000 m	Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529	IP20

Ambient conditions

Temperature
Operation
Horizontal mounting orientation	-25 to 60°C
Vertical mounting orientation	-25 to 50°C
Derating	-
Storage	-40 to 85°C
Transport	-40 to 85°C
Relative humidity
Operation	Up to 100%, condensing
Storage	5 to 95%, non-condensing
Transport	5 to 95%, non-condensing

Mechanical properties

Note	Order 1x X20TB12 terminal block separately Order 1x X20cBM01 supply bus module separately
Pitch	12.5^+0.2 mm

Materialenummer:

X20cPS2110

Beskrivelse:

24 VDC supply module for internal I/O supply
Fuse for I/O power supply integrated in module

The power supply module is used for the internal I/O power supply. The module has an integrated replaceable fuse for the I/O power supply.

Obligatoriske tilbehør

Bus modules

X20cBM01	X20 power supply bus module, coated, 24 VDC keyed, internal I/O supply interrupted to the left

Terminal blocks

X20TB12	X20 terminal block, 12-pin, 24 VDC keyed

Automation Studio HW Upgrades	Version (Date)	Download
V3.0 HW Upgrade (X20cPS2110)		EXE / 1 MB Login for download
V4.0 HW Upgrade (X20cPS2110)		EXE / 636 KB Login for download

Certifikater	Version (Date)	Download
244665 CSA HazLoc Certificate of Compliance X20, X67		PDF / 56 KB Login for download
E115267 UL CoC X20		PDF / 847 KB Login for download
FTZU 09 ATEX 0083X		PDF / 697 KB Login for download

Dokumentation	Version (Date)	Download
Coated modules		PDF / 60 KB Login for download
Data sheet X20(c)PS2110		PDF / 179 KB Login for download
X20 System User´s Manual		PDF / 56 MB Login for download

E-CAD (Electro eller EPLAN Templates)	Version (Date)	Download
X20 EPLAN P8 from V2.4		EXE / 123 MB Login for download

M-CAD (Mechan. Templates)	Version (Date)	Download
3D File DXF/STEP X20 Electronic module		ZIP / 10 KB Login for download
3D File STEP X20 I/O-Slice		ZIP / 872 KB Login for download
Dimensions PDF X20 Electronic module		PDF / 3 KB Login for download