Vælg venligst land og sprog

Short description
Communication module EtherNet/IP Adapter (slave)
General information
B&R ID code 0xE237
Status indicators Module status, network status, data transfer
Diagnostics
Module status Yes, using status LED and software
Network status Yes, using status LED and software
Data transfer Yes, using status LED
Power consumption 2 W
Additional power dissipation caused by actuators (resistive) [W] -
Certifications
CE Yes
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
DNV GL Temperature: B (0 - 55°C)
Humidity: B (up to 100%)
Vibration: B (4 g)
EMC: B (bridge and open deck)
KR Yes
EAC Yes
Interfaces
Fieldbus EtherNet/IP Adapter (slave)
Variant 2x shielded RJ45 (switch)
Line length Max. 100 m between 2 stations (segment length)
Transfer rate 10/100 Mbit/s
Transfer
Physical layer 10BASE-T/100BASE-TX
Half-duplex Yes
Full-duplex Yes
Autonegotiation Yes
Auto-MDI/MDIX Yes
Controller netX100
Electrical properties
Electrical isolation PLC isolated from EtherNet/IP (IF1 and IF2)
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Installation elevation above sea level
0 to 2000 m No limitations
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Horizontal mounting orientation -25 to 60°C
Vertical mounting orientation -25 to 50°C
Derating -
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation Up to 100%, condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Slot In the X20c CPU and in the X20cBC1083 expandable bus controller
Materialenummer:
X20cIF10D3-1
Beskrivelse:
  • EtherNet/IP adapter (slave)
  • Integrated switch for efficient cabling

The interface module functions as an EtherNet/IP adapter (slave). It can be operated in X20 CPUs or in the expandable X20BC1083 POWERLINK bus controller.

The interface has two RJ45 sockets. Both connections lead to an integrated switch. This makes it easy to create daisy-chain connections using EtherNet/IP.

Automation Studio HW Upgrades Version (Date) Download
V3.0 HW Upgrade (X20cIF10D3-1) EXE / 2 MB
V4.0 HW Upgrade (X20cIF10D3-1) EXE / 918 KB
Certifikater Version (Date) Download
244665 CSA HazLoc Certificate of Compliance X20, X67 PDF / 56 KB
DNV GL Type Approval Certificate - X20 / Power Panel T30 PDF / 171 KB
E115267 UL CoC X20 PDF / 1 MB
FTZU 09 ATEX 0083X PDF / 697 KB
KR Type Approval Certificate MIL39390-AC003 (X20 System) PDF / 758 KB
Dokumentation Version (Date) Download
Coated modules PDF / 60 KB
Datasheet X20(c)IF10D3-1 PDF / 1 MB
X20 System User´s Manual PDF / 50 MB
E-CAD (Electro eller EPLAN Templates) Version (Date) Download
X20 EPLAN P8 from V2.4 EXE / 161 MB
Fieldbus beskrivelsesfiler Version (Date) Download
X20cIF10D3-1 EDS Package ZIP / 435 KB
M-CAD (Mechan. Templates) Version (Date) Download
3D File STEP/DXF X20 Module ZIP / 1 MB

Vælg venligst land og sprog

B&R Logo