Vælg venligst land og sprog

General information
B&R ID code 0xB1D2
Configuration software Automation Studio (version 3.0.81 and higher) / SYCONnet
Certifications
CE Yes
UL cULus E115267
Industrial control equipment
HazLoc cULus HazLoc E180196
Industrial control equipment
for hazardous locations
Class I, Division 2, Groups ABCD
GOST-R Yes
Controller
Processor netX 100
Dual-port memory 64 kB
Fieldbus
Type CANopen slave
Design 9-pin, male, DSUB connector
Transfer rate 10 kbit/s to 1 Mbit/s
Cyclic data Max. 1024 bytes
Emergency Producer
Functions Node-/ Life Guard., Heartbeat, PDO Mapping, NMT Management, SYNC
PDO communication synchronized, remotely requested and event driven (change of state) max. 64 Rx/TxPDO
Electrical characteristics
Nominal voltage +3.3 V ±5%
Nominal current 650 mA
Environmental conditions
Temperature
Operation 0 to 55°C
Mechanical properties
Dimensions
Width 120 mm
Height 73.2 mm
Depth 18.5 mm
Slot Standard PCI half-size module, Plug & Play
Installation in
B&R Automation PC Yes
B&R Panel PC Yes
Desktop PC Yes
Materialenummer:
5ACPCI.XCOS-00
Beskrivelse:
PCI CANopen slave

The 5ACPCI.XCOS-00 is equipped with a CANopen slave interface and can therefore be used as a slave in a CANopen network. Data is exchanged via the dual port memory.

Automation Studio HW Upgrades Version (Date) Download
V3.0 HW Upgrade (5ACPCI.XCOS-00) / 590 KB
V4.0 HW Upgrade (5ACPCI.XCOS-00) / 578 KB
Dokumentation Version (Date) Download
B&R Hilscher Fieldbus cards PDF / 3 MB
Datasheet 5ACPCI.XCOS-00 PDF / 461 KB
Fieldbus beskrivelsesfiler Version (Date) Download
5ACPCI.XCOS-00 EDS package / 18 KB
Firmware Upgrades Version (Date) Download
Hilscher firmware (5ACPCI.XCOS-00) / 203 KB

Vælg venligst land og sprog

B&R Logo