• Hjemmeside
  • Modelnummer
  • Serienummer
Login
Logget ind som BrugernavnLog ud
Loading...
B&R Logo
  • Specifikationer

  • Basisinformation

  • Tilbehør

  • Downloads

  • Revisioner

  • Serienummer

    Interfaces1x X2X Link slave
    Analog channels4 inputs (differential inputs, two of which can be used as temperature inputs, comparator can be configured
    using software), 4 outputs
    Power supply24 VDC
    Status indicatorsI/O function for each digital input/output, status
    Diagnostics
    I/O functionYes, with LEDs
    StatusYes, using status LED and software status
    Power supplyYes, with software status
    Power consumption5.0 W
    Electrical isolation
    24 VDC - AnalogYes
    24 VDC - Dig. outputNo
    24 VDC - Dig. inputYes
    Analog - AnalogNo
    X2X Link - 24 VDCYes
    X2X Link - Digital/AnalogYes
    Digital - AnalogYes
    Certifications
    CEYes
    ULcULus E115267
    Industrial control equipment
    GOST-RYes
    User interface
    Design12-pin multipoint plug
    TypeX2X Link slave
    Quantity8
    Nominal voltage24 VDC
    Input filter
    Hardware
    Channel 1-3≤4 µs
    Channel 4-8≤200 µs
    Software
    Channel 1-3-
    Channel 4-8-
    Input circuitSink or source
    Additional functions
    Channel 1-3Event counting, incremental encoder operation, gate, frequency or period measurement
    Channel 4-8-
    Input±10 V
    Input typeDifferential input (2 channels can be configured as temperature inputs)
    Digital converter resolution12-bit
    Conversion time≤ 300 µs for all channels
    Output formatINT
    Input impedance in signal range20 MΩ
    Input protectionProtection against wiring with supply voltage
    QuantityUp to 2 (depending on the configuration)
    TypeResistance measurement with constant current feed for 2 wires
    Output formatINT
    Conversion time≤ 300 µs for all channels
    Resistance measurement range0 to 4000 Ω
    Sensor
    NoteCan be configured for each channel using software
    KTY10-6-50 to 125°C
    PT1000-200 to 850°C
    Quantity1, can be configured using software
    TriggeringTakes place either on digital output 1 or on analog output 1 using predefinable values
    Response time≤200 µs
    Timestamp for triggerYes
    Trigger thresholdCan be used on an analog input
    Trigger threshold for triggeringYes
    Quantity8
    Nominal voltage24 VDC
    Total nominal current10.0 A
    Output circuitSource
    Output protectionThermal cutoff for overcurrent and short circuit, integrated protection for switching inductances, reverse polarity protection for output supply
    Sensor power supplyExternal
    Additional functions-
    Nominal output current
    Outputs 1 - 40.5 A
    Outputs 5 - 82.0 A
    Output±10 V
    Digital converter resolution12-bit
    Conversion time≤ 300 µs for all channels
    Switch on/off behaviorInternal enable relay for booting and errors
    Output protectionProtection against wiring with supply voltage, short circuit protection
    Data formatINT
    Degree of protection per EN 60529IP20
    Temperature
    Operation0 to 50°C
    Storage-25 to 70°C
    Relative humidity
    Operation5 to 95%
    NoteOrder 1x TB712 terminal block separately
    Order 2x TB718 terminal blocks separately
    InstallationOn EN50022 compliant mounting rails or screw mounting
    Dimensions
    Width170 mm
    Height80 mm
    Depth30 mm
    Weight410 g

7XX436.50-1

  • 8 digital inputs with special functions (event counting, incremental encoder operation, frequency and period measurement)
  • 8 digital outputs
  • 4 analog inputs (2 inputs for temperature measurement can be used with KTY10 or PT1000)
  • 4 analog outputs
-
Product description:
Material number:
7XX436.50-1
Description:
Remote input/output module, 24 VDC, X2X Link, electrically isolated, 8 digital inputs 24 VDC, sink/source, 2 event counters or 1 incremental encoder or 1 gate time/period duration measurement, 4 digital outputs 0.5 A, 4 digital outputs 2 A, 24 VDC, 4 analog inputs, ±10 V, 12-bit, two of the analog inputs can be used as KTY10 or PT1000 inputs, 4 analog outputs, ±10 V, 12-bit, order 2x 0TB718 and 1x 0TB712 terminal block separately.
Terminal blocks
  • 7TB712.9

    Accessory terminal block, 12-pin, screw clamps 1.5 mm²

  • 7TB712.91

    Accessory terminal block, 12-pin, cage clamp terminal block 1.5 mm²

  • 7TB718.9

    Accessory terminal block, 18-pin, screw clamps 1.5 mm²

  • 7TB718.91

    Accessory terminal block, 18-pin, cage clamp terminal block 1.5 mm²

Other
Terminal blocks
  • 7TB722.9

    2003 terminal block, 22-pin, screw clamps

  • 7TB722.91

    2003 terminal block, 22-pin, cage clamps

  • 7TB733.9

    2003 terminal block, 33-pin, screw clamps

  • 7TB733.91

    2003 terminal block, 33-pin, cage clamps

  • 7TB736.9

    2003 terminal block, 36-pin, screw clamps

  • 7TB736.91

    2003 terminal block, 36-pin, cage clamps

  • 7TB772.91

    2003 terminal block, 72-pin, cage clamps

skift alle
Share
Dette websted bruger cookies til at skabe en bedre kundeoplevelse. Ved fortsat at blive på webstedet accepterer du vores brug af cookies. Du kan finde mere information om cookies i vores Privacy Policy.