Short description
| Stepper motor | Stepper motor flange size 87.1 mm, length 98 mm |
General information
| Certifications | |
| CE | Yes |
Specific motor data
General motor data
| Protection class | IP40 |
| Stepping angle | 1.8° |
| Max. surface temperature | 100°C |
| Average period of operation between failures | 20,000 hours |
| Cable length | 300 mm |
| Cable cross section | AWG 22, UL3266 |
| Shaft type | Keyed |
| Insulation class | B (130°C) |
| Insulation resistance | 100 MΩ min. 500 VDC |
| Dielectric resistance | 1776 VAC for 1 minute |
| Driver supply voltage | Max. 80 VDC |
Ambient conditions
| Temperature | |
| Operation | -20 to 40°C |
| Storage | -30 to 85°C |
| Transport | -30 to 85°C |
| Relative humidity | |
| Operation | 5 to 95%, non-condensing |
| Storage | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
Produktové číslo:
80MPH3.300S000-01Popis:
2-phase hybrid stepper motor, 87.1 mm flange, length 98 mm, 3 A series / 6 A parallel, 7.8 Nm holding torque, 5.5 Nm stall torque
Možné příslušenství
Accessories
| 80XMPHXRE.W1-10 | IP upgrade kit with cable clamp for stepper motors from the 80MPH series, IP65, 10 units per package |
| Certifikáty | Verze (Datum) | Stáhnout |
|---|---|---|
| Declaration Motors Hybrid | PDF / 301 KB | |
| E360421 UL Certificate of Compliance 80MPH | PDF / 243 KB |
| Dokumentace | Verze (Datum) | Stáhnout |
|---|---|---|
| Stepper motors user's manual | PDF / 15 MB |
