Please choose country and language

Short description
Communication module 1x PROFIBUS DP V0/V1 master
General information
B&R ID code 0xA716
Status indicators Module status, data transfer
Diagnostics
Module status Yes, using status LED and software
Network status Yes, using status LED and software
Data transfer Yes, using status LED
Power consumption 1.8 W
Additional power dissipation caused by actuators (resistive) [W] -
Certifications
CE Yes
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
DNV GL Temperature: B (0 - 55°C)
Humidity: B (up to 100%)
Vibration: B (4 g)
EMC: B (bridge and open deck)
LR ENV1
KR Yes
ABS Yes
EAC Yes
KC Yes
Interfaces
Interface IF1
Fieldbus PROFIBUS DP V0/V1 master
Variant 9-pin female DSUB connector
Max. distance 1200 m
Transfer rate Max. 12 Mbit/s
Controller netX100
Memory 8 MB SDRAM
Cyclic data
Input data Max. 3.5 kB
Output data Max. 3.5 kB
Electrical properties
Electrical isolation PLC isolated from PROFIBUS (IF1)
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Installation elevation above sea level
0 to 2000 m No limitations
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Horizontal mounting orientation -25 to 60°C
Vertical mounting orientation -25 to 50°C
Derating -
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Slot In the X20 CPU and in the X20BC1083 expandable bus controller
Produktové číslo:
X20IF1061-1
Popis:
  • PROFIBUS DP V1 master

The interface module is equipped with a PROFIBUS DP V1 interface. This allows third-party components to be integrated in the B&R system and makes it possible to quickly and easily transfer data in both directions.

The interface module can be operated in X20 CPUs or in the expandable POWERLINK bus controller X20BC1083.

Možné příslušenství
Infrastructure components
0G1000.00-090 Bus connector, RS485, for PROFIBUS networks
Automation Studio HW Upgrades Verze (Datum) Stáhnout
V3.0 HW Upgrade (X20IF1061-1) EXE / 679 KB
V3.0 HW Upgrade (X20IF1061-1) EXE / 1 MB
V4.0 HW Upgrade (X20IF1061-1) EXE / 907 KB
Certifikáty Verze (Datum) Stáhnout
244665 CSA HazLoc Certificate of Compliance X20, X67 PDF / 56 KB
ABS Type Approval Certificate - X20 IO Series PDF / 2 MB
DNV GL Type Approval Certificate - X20 / Power Panel T30 PDF / 164 KB
E115267 UL CoC X20 PDF / 847 KB
FTZU 09 ATEX 0083X PDF / 697 KB
KR Type Approval Certificate MIL39390-AC003 (X20 System) PDF / 758 KB
Lloyds Register PDF / 506 KB
Profibus DP Certificate X20IF1061-1 PDF / 180 KB
Dokumentace Verze (Datum) Stáhnout
Data sheet X20(c)IF1061-1 PDF / 752 KB
X20 System User´s Manual PDF / 56 MB
E-CAD (Electro or EPLAN Templates) Verze (Datum) Stáhnout
X20 EPLAN P8 from V2.4 EXE / 161 MB
M-CAD (Mechan. Templates) Verze (Datum) Stáhnout
3D File DXF/STEP X20 Interface module X20(c)IF106x(-1) ZIP / 1 MB

Please choose country and language

B&R Logo