Please choose country and language

Short description
Communication module DALI master
General information
B&R ID code 0xDE85
Diagnostics
Module status Yes, using status LED and software
Bus status Yes, using status LED and software
Power consumption
Bus 0.2 W
Internal I/O 0.4 W
Additional power dissipation caused by actuators (resistive) [W] 4 W
Insulation voltages
Channel - Bus 510 VAC / 1 minute
Certifications
CE Yes
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
EAC Yes
DALI bus
Insulation system Basic insulation
Open-circuit voltage 16.5 V ±5%
Short-circuit proof Yes (current limiting)
Signal voltage
Low -6.5 V to 6.5 V (typically 0 V)
High 11.5 V to 20.5 V (typically 16 V)
Signal current
Low ≤250 mA (internally limited)
High ≤130 mA at voltages ≥11.5 V
Transfer rate 1200 baud
Maximum number of slaves 64
Data signal slew rate (Manchester bi-phase)
Falling edge 10 μs ≤ tfall ≤ 100 μs
Rising edge 10 μs ≤ trise ≤ 100 μs
Electrical properties
Electrical isolation Channel isolated from bus
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Installation elevation above sea level
0 to 2000 m No limitations
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Horizontal mounting orientation -25 to 60°C
Vertical mounting orientation -25 to 50°C
Derating -
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order 1x X20TB06 or X20TB12 terminal block separately
Order 1x X20BM11 bus module separately
Pitch 12.5 +0.2 mm
Produktové číslo:
X20CS1013
Popis:
  • Integrated power supply
  • Up to 64 operating devices (individual addresses)
  • Up to 16 groups (group addresses)
  • Up to 16 scenes (scene lighting values)

The module is a DALI control device with an integrated power supply. Up to 64 operating devices can be connected.

DALI stands for Digital Addressable Lighting Interface and enables easy and safe control of light fixtures using a standardized digital operating device interface. The DALI bus conforms with EN 62386 series of standards and is now supported by many electronic ballast manufacturers.

Povinné příslušenství
Bus modules
X20BM11 X20 bus module, 24 VDC keyed, internal I/O supply continuous
X20BM15 X20 bus module, with node number switch, 24 VDC keyed, internal I/O supply continuous
Terminal blocks
X20TB06 X20 terminal block, 6-pin, 24 VDC keyed
X20TB12 X20 terminal block, 12-pin, 24 VDC keyed
Automation Studio HW Upgrades Verze (Datum) Stáhnout
V2.7 HW Upgrade (X20CS1013) EXE / 906 KB
V3.0 HW Upgrade (X20CS1013) EXE / 1 MB
V4.0 HW Upgrade (X20CS1013) EXE / 611 KB
Certifikáty Verze (Datum) Stáhnout
244665 CSA HazLoc Certificate of Compliance X20, X67 PDF / 56 KB
E115267 UL CoC X20 PDF / 847 KB
FTZU 09 ATEX 0083X PDF / 697 KB
Dokumentace Verze (Datum) Stáhnout
Datasheet X20CS1013 PDF / 186 KB
X20 System User´s Manual PDF / 56 MB
E-CAD (Electro or EPLAN Templates) Verze (Datum) Stáhnout
X20 EPLAN P8 from V2.4 EXE / 161 MB
M-CAD (Mechan. Templates) Verze (Datum) Stáhnout
3D File DXF/STEP X20 Electronic module ZIP / 10 KB
3D File STEP X20 I/O-Slice ZIP / 872 KB
Dimensions PDF X20 Electronic module PDF / 3 KB

Please choose country and language

B&R Logo

Please choose country

B&R Logo