• Website
  • Produktové označení
  • Sériové číslo
Přihlášen jako Uživatelské jménoOdhlásit
B&R Logo
  • Specifikace

  • Základní informace

  • Příslušenství

  • Ke stažení

  • Revize

  • Sériové číslo

    Status displayGreen LED (DC OK), threshold value Uout = 21.5 V
    Isolation voltage
    Input - Output3 kV AC (type test)
    3 kV AC (routine test)
    Active DC OK switch output24 V, 20 mA
    Connection typeScrew clamp connection
    Connection cross section
    Wire end sleevesFlexible cables require wire end sleeves in order to fulfill EN 60950 / UL 60950
    Flexible0.2 to 2.5 mm² / 24 to 12 AWG
    Inflexible0.2 to 2.5 mm² / 24 to 12 AWG
    Wire stripping length7 mm (input/output)
    UL (cULus)cULus E123528
    Industrial control equipment
    Nominal input voltage100 to 240 VAC
    Input voltageAC 85 to 264 V (wide range), 45 to 65 Hz
    DC 90 to 350 V
    Input currentApprox. 1.3 A (120 VAC)
    Approx. 0.8 A (230 VAC)
    Inrush current limitation<20 A (typical)
    I2t<2.1 A2s
    Power failure bypass>20 ms (120 VAC)
    >100 ms (230 VAC)
    Switch-on time<0.4 s
    Protective circuitTransient surge protection (varistor)
    Internal fuse3.15 A, slow-blow
    Required line fuse for line protection6 A
    10 A
    16 A (characteristic B)
    Nominal voltage24 VDC ±1%
    Output power96 W
    Setting range for output voltage22.5 to 28.5 VDC
    Output current
    -25 to 40°C5.0 A
    40 to 60°C4.0 A
    >60°CDerating: 2.5% per °C
    Current limitationApprox. 9 A (short circuit)
    Control deviation<1% (static load change 10 to 90%)
    <3% (dynamic load change 10 to 90%)
    <0.1% (input voltage change ±10%)
    Rise time0.3 ms (UOUT (10 to 90%))
    Residual ripple<100 mVSS (at rated values)
    Switching peaks<100 mVSS (at rated values)
    Can be connected in parallelYes, to establish redundancy and increase capacity
    Can be connected in seriesYes
    Max. capacitive loadUnlimited
    Protection against internal overvoltagesYes, limited to approximately 35 VDC
    Protection functionsOutput protected against continuous short circuit, open circuit and overload
    Power back immunityMax. 35 VDC
    Output noise suppressionUnit complies with EN 55011 (Class B)
    Efficiency>88% (at 230 VAC and rated values)
    MTBF>500,000 h, in accordance with IEC 61709 (SN 29500)
    Power dissipation
    Rated loadMax. 12 W
    No-load operationMax. 2.5 W
    Mounting orientation
    Ventilation/CoolingNormal convection, no fan required
    Protection per EN 60529IP20
    Rated protectionΙΙ, (in closed control cabinet)
    Operation-25 to 70°C (>60°C derating)
    Storage-40 to 85°C
    Transport-40 to 85°C
    Relative humidity
    OperationMax. 95%, non-condensing
    Operation<15 Hz, amplitude ±2.5 mm, in accordance with IEC 68-2-6
    15 to 150 Hz, 2.3 g
    Operation30 g in each direction, in accordance with IEC 68-2-27
    Pollution degree2, in accordance with EN 50178
    Climate category3K3, in accordance with EN 60721
    MaterialPolyamide PA, color green
    InstallationEasy rail mounting (DIN rail NS 35, EN 60715)
    Width67.5 mm
    Height99 mm
    Depth114.5 mm
    Weight400 g


  • 100 to 240 VAC wide-range input
  • Power boost for reliable startup of demanding loads (up to 5 A)
  • Can be connected in parallel for increased capacity and redundancy
  • Active DC OK switch output
  • Reliable operation due to long power failure bypass function under full load and high MTBF (>500,000 h)
  • International certification package
  • Wide temperature range from -25 to 70°C
  • Extra slender design
Product description:
Material number:
24 VDC power supply, 1 phase, 4 A, input 100 to 240 VAC, wide range, top-hat rail installation
zobrazit vše
This site uses cookies to enable a better customer experience. By continuing to browse the site you are agreeing to our use of cookies. Please find more information about cookies in our Data privacy statement.