• Website
  • Produktové označení
  • Sériové číslo
Login
Přihlášen jako Uživatelské jménoOdhlásit
Načítání...
Čeština

Please choose your country:

B&R Logo
  • Specifikace

  • Základní informace

  • Příslušenství

  • Ke stažení

  • Revize

  • Sériové číslo

    Communication module1x POWERLINK (V1/V2) managing or controlled node
    B&R ID code0x2152
    Ready relayNormally open and normally closed contact, max. 30 VDC, max. 6 A
    Status indicatorsStatus of POWERLINK node, network activity, link
    Diagnostics
    Bus functionYes, using status LED and software
    Station statusYes, using status LED and software
    Power consumption2 W
    Electrical isolation
    PC - IF1Yes
    Certification
    CEYes
    ULcULus E115267
    Industrial control equipment
    GOST-RIn preparation
    SRAM1 MB, battery-backed
    Fieldbus POWERLINK (V1/V2) managing or controlled node
    TypeType 3
    See the POWERLINK help system under "General information, Hardware - IF/LS".
    Design2x shielded RJ45 (hub)
    Cable lengthMax. 100 m between 2 nodes (segment length)
    Transfer rate100 Mbit/s
    Transmission
    Physical layer100BASE-TX
    Half-duplexYes
    Full-duplexPOWERLINK mode: No / Ethernet mode: Yes
    AutonegotiationYes
    Auto-MDI / MDIXYes
    Hub propagation delay0.96 to 1 µs
    EN 60529 protectionIP20 when installed
    Temperature
    Operation0 to 55°C
    Storage-25 to 70°C
    Transport-25 to 70°C
    Relative humidity
    Operation0 to 95%, non-condensing
    Storage0 to 95%, non-condensing
    Transport0 to 95%, non-condensing
    NoteOrder 1x TB704 terminal block separately
    Lithium battery is included in the delivery
    SlotStandard PCI half-size module, Plug & Play
    Installation in
    B&R Automation PCYes
    B&R Panel PCYes
    Desktop PCYes

5LS182.6-1

  • POWERLINK for real-time Ethernet communication
  • Integrated hub for efficient cabling
  • Configurable ring redundancy
-
Product description:
Material number:
5LS182.6-1
Description:
Logic scanner, PCI half-size module, 1 POWERLINK (V1/V2) interface, managing or controlled node, integrated 2-port hub, ring redundancy function, 1 MB SRAM (Automation Runtime), order 1x TB704 terminal block separately
Terminal blocks
  • 0TB704.9

    Accessory terminal block, 4-pin, screw clamps 2.5 mm²

  • 0TB704.91

    Accessory terminal block, 4-pin, cage clamps 2.5 mm²

Batteries
  • 0AC201.91

    Lithium batteries 4 pcs., 3 V / 950 mAh button cell

  • 4A0006.00-000

    Lithium battery, 3 V / 950 mAh, button cell

zobrazit vše
Share
This site uses cookies to enable a better customer experience. By continuing to browse the site you are agreeing to our use of cookies. Please find more information about cookies in our Data privacy statement.