Please choose country and language

Short description
I/O module 2 resolver inputs, 2 digital inputs, 2 digital outputs
General information
B&R ID code 0xA5C7
Status indicators I/O function for each channel, supply voltage, bus function
Outputs Yes, using status LED and software
I/O power supply Yes, using status LED and software
Connection type
X2X Link M12, B-keyed
Inputs/Outputs M12, A-keyed
Encoder M12, 12-pin, A-keyed
I/O power supply M8, 4-pin
Power consumption
Internal I/O 1 W
X2X Link power supply 0.75 W
Additional power dissipation caused by actuators (resistive) [W] 12.5 W
CE Yes
ATEX Zone 2, II 3G Ex nA IIA T5 Gc
IP67, Ta = 0 - Max. 60°C
TÜV 05 ATEX 7201X
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
KC Yes
Resolver inputs
Quantity 2
Reference output
Output voltage Typ. 4.4 VEff
Output current Max. 50 mAEff
Frequency 10 kHz
Type Differential
Angular position resolution 14-bit
Short-circuit protection (reference output) Yes
Input impedance 10.4 kΩ - j*11.1 kΩ
Resolver type BRX / BRT
Resolver transformation ratio
BRX 0.5 (±10%)
BRT 1 (±10%)
I/O power supply
Nominal voltage 24 VDC
Voltage range 18 to 30 VDC
Digital inputs
Quantity 2
Nominal voltage 24 VDC
Input current at 24 VDC Typ. 5 mA
Input circuit Sink
Input filter
Hardware ≤20 µs
Software -
Sensor power supply 0.5 A summation current
Input delay <1 ms
Switching threshold
Low <5 V
High >15 V
Digital outputs
Quantity 2
Nominal voltage 24 VDC
Nominal output current 0.5 A
Total nominal current 1 A
Output circuit Source
Output protection Thermal cutoff for overcurrent and short circuit, integrated protection for switching inductances, reverse polarity protection for output power supply
Switching delay
0 → 1 Max. 500 µs
1 → 0 Max. 500 µs
Switching frequency
Resistive load Max. 100 Hz
Electrical properties
Electrical isolation
Channel isolated from bus

Channel not isolated from channel
Operating conditions
Mounting orientation
Any Yes
Installation elevation above sea level
0 to 2000 m No limitations
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP67
Ambient conditions
Operation -25 to 60°C
Derating -
Storage -40 to 85°C
Transport -40 to 85°C
Mechanical properties
Width 53 mm
Height 85 mm
Depth 42 mm
Weight 200 g
Torque for connections
M8 Max. 0.4 Nm
M12 Max. 0.6 Nm
Produktové číslo:
  • 2 resolvers
  • BRX/BRT evaluation
  • 2 digital inputs and outputs for each

The module is equipped with 2 resolver connections as well as 2 digital inputs and outputs for each. It is possible to evaluate BRX and BRT resolvers using a configurable sine gain of 1 or 0.25.

Automation Studio HW Upgrades Verze (Datum) Stáhnout
AS 2.6 HW Upgrade (X67DC2322) EXE / 563 KB
V3.0 HW Upgrade (X67DC2322) EXE / 3 MB
V4.0 HW Upgrade (X67DC2322) EXE / 2 MB
Certifikáty Verze (Datum) Stáhnout
244665 CSA HazLoc Certificate of Compliance X20, X67 PDF / 56 KB
E115267 UL CoC X67 PDF / 84 KB
Safe cutoff of potential groups PDF / 147 KB
TÜV 05 ATEX 7201 X PDF / 129 KB
Dokumentace Verze (Datum) Stáhnout
Data sheet X67DC2322 PDF / 459 KB
X67 System User´s Manual PDF / 19 MB
E-CAD (Electro or EPLAN Templates) Verze (Datum) Stáhnout
X67 EPLAN P8 EXE / 85 MB
X67 EPLAN P8 from V2.4 EXE / 105 MB
M-CAD (Mechan. Templates) Verze (Datum) Stáhnout
3D File DXF/STEP X67 ZIP / 1 MB

Please choose country and language

B&R Logo