5LS182.6-1

Short description

Communication module	1x POWERLINK (V1/V2) managing or controlled node

General information

B&R ID code	0x2152
Ready relay	Normally open contact and normally closed contact, max. 30 VDC, max. 6 A
Status indicators	Status of the POWERLINK station, network activity, link
Diagnostics
Bus function	Yes, using LED status indicator and software
Station status	Yes, using LED status indicator and software
Power consumption	2 W
Electrical isolation
PC - IF1	Yes
Certifications
CE	Yes
UL	cULus E115267 Industrial control equipment
EAC	Product family certification

Controller

SRAM	1 MB, battery-backed

Interfaces

Fieldbus	POWERLINK (V1/V2) managing or controlled node
Type	Type 3
Variant	2x shielded RJ45 (hub)
Line length	Max. 100 m between 2 stations (segment length)
Transfer rate	100 Mbit/s
Transfer
Physical layer	100BASE-TX
Half-duplex	Yes
Full-duplex	POWERLINK mode: No / Ethernet mode: Yes
Autonegotiation	Yes
Auto-MDI/MDIX	Yes
Hub propagation delay	0.96 to 1 µs

Operating conditions

Degree of protection per EN 60529	IP20 in installed state

Ambient conditions

Temperature
Operation	0 to 55°C
Storage	-25 to 70°C
Transport	-25 to 70°C
Relative humidity
Operation	0 to 95%, non-condensing
Storage	0 to 95%, non-condensing
Transport	0 to 95%, non-condensing

Mechanical properties

Note	Order 1x terminal block TB704 separately. Lithium battery included in content of delivery
Slot	Standard PCI half-size module, plug and play
Installation in
B&R Automation PC	Yes
B&R Panel PC	Yes
Desktop PC	Yes

Materiálové číslo:

5LS182.6-1

Popis:

POWERLINK (V1/V2) for real-time Ethernet communication
Integrated hub for efficient cabling
Configurable ring redundancy

Logic scanner module 5LS182.6-1 is a PCI half-size module. It supports plug and play and has 1 MB SRAM for remanent data (process variables and data objects). Memory available for remanent process variables depends on the CPU, Automation Runtime, etc.

5LS182.6-1 is a POWERLINK logic scanner module with an integrated 2-port hub. It can be used as a manager or bus controller module. It is connected via an RJ45 port.

The module is also equipped with a ready relay.

Zahrnuto v dodávce

Batteries

4A0006.00-000	Lithium battery, 3 V / 950 mAh, button cell

Povinné příslušenství

Terminal blocks

0TB704.9	Accessory terminal block, 4-pin, screw clamp terminal block 2.5 mm²
0TB704.91	Accessory terminal block, 4-pin, push-in terminal block 2.5 mm²

Volitelné příslušenství

Batteries

0AC201.91	Lithium batteries 4 pcs., 3 V / 950 mAh button cell

Automation Studio HW Upgrades	Verze (datum)	Ke stažení
V2.7 HW Upgrade (5LS182.6-1)		EXE / 615 KB Pro stažení je potřeba se přihlásit.
V3.0 HW Upgrade (5LS182.6-1)		EXE / 615 KB Pro stažení je potřeba se přihlásit.
V4.0 HW Upgrade (5LS182.6-1)		EXE / 3 MB Pro stažení je potřeba se přihlásit.
V6.0 HW Upgrade (5LS182.6-1)		EXE / 3 MB Pro stažení je potřeba se přihlásit.

Dokumentace	Verze (datum)	Ke stažení
Data sheet 5LS182.6-1		PDF / 4 MB Pro stažení je potřeba se přihlásit.

E-CAD (Electro or EPLAN Templates)	Verze (datum)	Ke stažení
APC EPLAN P8 from V2.4		EXE / 99 MB Pro stažení je potřeba se přihlásit.