DWL@DWL10000115129
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
---|---|---|---|---|---|---|
2.1 | * | Win7/32bit, Win7/64bit, WES7, Windows8.1, Windows10 | 30.03.2018 | 2 MB | ZIP | B_R_HMI_Diagnostics_V2.1.ZIP |
Popis |
HMI Diagnostics Utility (WES7, Win7, Win8.1, Win10) ************************************************************** Please note that the HMI Diagnostics Utility has been replaced by the HMI Report Utility in the Universal ADI driver from version 2.0 (Windows 10 2016 LTSB and later). ************************************************************** B&R HMI Diagnostics analyzes your device and creates a report file. This report can be used for error diagnosis. This version supports the device families: - Automation PC 510 - Automation PC 511 - Automation PC 620 - Automation PC 810 - Automation PC 820 - Automation PC 910 - Automation PC 2100 - Automation PC 2200 - Automation PC 3100 - Mobile Panel 7100 (32-bit only) - Panel PC 700 - Panel PC 800 - Panel PC 900 - Panel PC 2100 - Panel PC 2200 - Panel PC 3100 - Power Panel 500 and connected: - Automation Panel 800 - Automation Panel 900 - Automation Panel 9x3 - Automation Panel 9xD - Automation Panel 1000 - Automation Panel 5000 Supported B&R operating systems: - Windows 7 SP1 - Windows Embedded Standard 7 SP1 - Windows 8.1 - Windows 10 Make sure to use the correct binary file: BrHmiDiag.exe for all 32-bit Windows versions. BrHmiDiag_x64.exe for all 64-bit Windows versions. ---------------------------------------------------------------- Version 2.1 / 2018-02-27 / PAM ---------------------------------------------------------------- Changes - Support for Automation PC and Panel PC 2200 added. - Support for hypervisor synchronization added. |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
2.0 | * | Win7/32bit, Win7/64bit, WES7, Windows8.1, Windows10 | 03.11.2017 | 2 MB | ZIP | B_R_HMI_Diagnostics_V2.0.ZIP |
Popis |
HMI Diagnostics Utility (WES7, Win7, Win8.1, Win10) B&R HMI Diagnostics analyzes your device and creates a report file. This report can be used for error diagnosis. This version supports the device families: - Automation PC 510 - Automation PC 511 - Automation PC 620 - Automation PC 810 - Automation PC 820 - Automation PC 910 - Automation PC 2100 - Automation PC 3100 - Mobile Panel 7100 (32-bit only) - Panel PC 700 - Panel PC 800 - Panel PC 900 - Panel PC 2100 - Panel PC 3100 - Power Panel 500 and connected: - Automation Panel 800 - Automation Panel 900 - Automation Panel 9x3 - Automation Panel 9xD - Automation Panel 1000 - Automation Panel 5000 Supported B&R operating systems: - Windows 7 SP1 - Windows Embedded Standard 7 SP1 - Windows 8.1 - Windows 10 Make sure to use the correct binary file: BrHmiDiag.exe for all 32-bit Windows versions. BrHmiDiag_x64.exe for all 64-bit Windows versions. ---------------------------------------------------------------- Version 2.0 / 2017-09-05 / PAM ---------------------------------------------------------------- Changes - Support for Windows XP removed. - Support for Automation Panel 830 removed. - Support for Mobile Panel 40/50 removed. - Support for Mobile Panel 100/200 removed. - Support for Panel PC 300 removed. - Support for Power Panel 100/200 removed. - Support for Power Panel 300/400 removed. - Support for Automation PC and Panel PC 3100 added. (B&R Universal ADI driver V1.1 is required) - Support for Mobile Panel 7100 added. - Support for SDL4 added. (B&R Universal ADI driver V1.1 is required) - Support for USB Enable on Automation Panels added. (B&R Universal ADI driver V1.1 is required) - Support for ISIO module (5AC901.ISIO-00) added. (B&R Universal ADI driver V1.1 is required) - Support for module functions added. (B&R Universal ADI driver is required) - Support for temperature and fan log values added. (B&R Universal ADI driver is required) - Updated company name. - B&R drivers are only shown when an instance is active. |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
1.90 | * | WinXP, WinXPe, WES2009, Win7/32bit, Win7/64bit, WES7, Windows8.1, Windows10 | 24.08.2016 | 2 MB | ZIP | B_R_HMI_Diagnostics_V1.90.ZIP |
Popis |
HMI Diagnostics Utility (WinXP, Win7, Win8.1, Win10) B&R HMI Diagnostics analyzes your device and creates a report file. This report can be used for error diagnosis. Supported B&R devices: - Automation Panel 800 - Automation Panel 830 - Automation Panel 900 - Automation Panel 9x3 - Automation Panel 9xD - Automation Panel 1000 - Automation Panel 5000 - Automation PC 510 - Automation PC 511 - Automation PC 620 - Automation PC 810 - Automation PC 820 - Automation PC 910 - Automation PC 2100 - Mobile Panel 40/50 - Mobile Panel 100/200 - Panel PC 300 - Panel PC 700 - Panel PC 800 - Panel PC 900 - Panel PC 2100 - Power Panel 100/200 - Power Panel 300/400 - Power Panel 500 Supported operating systems: - Windows XP SP3 - Windows Embedded Standard 2009 - Windows 7 SP1 (32-bit and 64-bit) - Windows Embedded Standard 7 SP1 (32-bit and 64-bit) - Windows Embedded 8.1 Industry Pro (32-bit and 64-bit) - Windows 10 IoT Enterprise 2015 LTSB (32-bit and 64-bit) Make sure to use the correct binary file: BrHmiDiag.exe: Windows desktop operating systems like Windows XP, Windows 7 or Windows 8.1. BrHmiDiag_x64.exe: 64-bit Windows desktop operating systems like Windows 7 64-bit or Windows 8.1 64-bit. ---------------------------------------------------------------- Version 1.90 / 2016-06-28 / PAM ---------------------------------------------------------------- Changes: - Support for AP1000 and AP5000 added. - Support for SDL3 added. - Support for Windows 10 added. - Support for statistics values greater than 65,535 added. (ADI driver support required) - "Description" table column renamed to "Remark". - Unnecessary remarks removed. - Test group "Automation Device Interface" renamed to "B&R Drivers and Tools". - Support for DefaultSettingsRestore.exe in test category "B&R Drivers and Tools -> ADI Driver" added. - Support for ADI SNMP Agent, CAN Driver, SRAM Driver, Touch Driver and Touch Lock added. - Install location and date added in "Product Information". Fixes: - UPS components in test group "Automation Device Interface" were not shown on APC910/PPC900. - BrAdiUpsSvc.exe in test group "Automation Device Interface" was not shown in Windows 8.1. - An empty headline ("Temperatures") was shown on APC2100 display link. - An empty headline ("Temperatures") was shown on APC51x and PP500 IF boards. - An empty headline ("Temperatures") was shown on APC51x system units. - Test group "DVI" was shown on PP500s without an I/O board. - An incorrect error message was shown when the DVI header could not be read. |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
1.80 | * | WinXP, WinXPe, WES2009, Win7/32bit, Win7/64bit, WES7, Windows8.1 | 29.09.2014 | 488 KB | ZIP | B_R_HMI_Diagnostics_V1.80.ZIP |
Popis |
HMI Diagnostics Utility (WinXP, Win7, Win8.1) B&R HMI Diagnostics analyzes your device and creates a report file. This report can be used for error diagnosis. Supported B&R devices: - Automation Panel 800 - Automation Panel 830 - Automation Panel 900 - Automation Panel 9x3 - Automation Panel 9xD - Automation PC 2100 - Automation PC 510 - Automation PC 511 - Automation PC 620 - Automation PC 810 - Automation PC 820 - Automatoin PC 910 - Mobile Panel 40/50 - Mobile Panel 100/200 - Panel PC 2100 - Panel PC 300 - Panel PC 700 - Panel PC 800 - Panel PC 900 - Power Panel 100/200 - Power Panel 300/400 - Power Panel 500 Supported operating systems: - Windows XP SP3 - Windows Embedded Standard 2009 - Windows 7 SP1 (32-bit and 64-bit) - Windows Embedded Standard 7 SP1 (32-bit and 64-bit) - Windows Embedded 8.1 Industry Pro (32-bit and 64-bit) Make sure to use the correct binary file: BrHmiDiag.exe: Windows desktop operating systems like Windows XP, Windows 7 or Windows 8.1. BrHmiDiag_x64.exe: 64-bit Windows desktop operating systems like Windows 7 64-bit or Windows 8.1 64-bit. ---------------------------------------------------------------- Version 1.80 / 2014-07-16 ---------------------------------------------------------------- Changes - Support for APC2100/PPC2100 has been added. (B&R APC2100/PPC2100 ADI Driver V3.0 is required) - Support for Windows 8.1 has been added. Fixes - Factory settings of the display of a PPC900 were not shown. - Crashed when no ADI driver was installed. |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
1.70 | * | WinXP, WinXPe, WinXP+SP2, WES2009, Win7/32bit, Win7/64bit, WES7 | 17.01.2014 | 488 KB | ZIP | B_R_HMI_Diagnostics_V1.70.ZIP |
Popis |
HMI Diagnostics Utility (WinXP, Win7) B&R HMI Diagnostics analyzes your device and creates a report file. This report can be used for error diagnosis. B&R HMI Diagnostics supports different operating systems. Make sure to use the correct binary file: BrHmiDiag.exe Windows desktop operating systems like Windows XP, Windows Vista or Windows 7. BrHmiDiag_x64.exe 64-bit Windows desktop operating systems like Windows Vista 64-bit or Windows 7 64-bit. ---------------------------------------------------------------- Version 1.70 / 2013-10-22 ---------------------------------------------------------------- Changes - Support for PPC900 has been added. (B&R APC910 PPC900 ADI Driver V2.1 is required) - Key layers now begin at 0. - Support for CPU power on APC910 and PPC900 has been added. - Support for CPU temperature on CCAX CPU boards has been added. - Support for BIOS core version has been removed. - Support for temperature, fan and UPS alarms have been added. Fixes - Raw data of factory settings on APC910 were read with wrong size. - Mode/node switch was shown on APC510. |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
1.50 | * | WinXP, WinXPe, WinXP+SP2, WES2009, Win7/32bit, Win7/64bit, WES7 | 14.11.2012 | 480 KB | ZIP | B_R_HMI_Diagnostics_V1.50.ZIP |
Popis |
HMI Diagnostics Utility (WinXP, Win7) B&R HMI Diagnostics analyzes your device and creates a report file. This report can be used for error diagnosis. B&R HMI Diagnostics supports different operating systems. Make sure to use the correct binary file: BrHmiDiag.exe Windows desktop operating systems like Windows XP, Windows Vista or Windows 7. BrHmiDiag_x64.exe 64-bit Windows desktop operating systems like Windows Vista 64-bit or Windows 7 64-bit. ---------------------------------------------------------------- Version 1.50 / 2012-09-12 ---------------------------------------------------------------- Changes - Support for APC910 has been added. (B&R APC910 ADI Driver V0.6 is required) Fixes - Serveral smaller bug fixes and optimizations on the program interface. |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
1.40 | * | WinXP, WinCE5x, WinXPe, WinXP+SP2, WinCE6x, WES2009, Win7/32bit, Win7/64bit, WES7 | 13.12.2011 | 822 KB | ZIP | B_R_HMI_Diagnostics_V1.40.ZIP |
Popis |
HMI Diagnostics Utility B&R HMI Diagnostics analyzes your device and creates a report file. This report can be used for error diagnosis. B&R HMI Diagnostics supports different operating systems. Make sure to use the correct binary file: BrHmiDiag.exe Windows desktop operating systems like Windows XP or Windows 7. Folder x64:</> BrHmiDiag_x64.exe 64-bit Windows desktop operating systems like Windows 7 64-bit. Folder CE:</> BrHmiDiag_CE50_ARM.exe Windows CE 5.0, ARM BrHmiDiag_CE50_X86.exe Windows CE 5.0, X86 BrHmiDiag_CE60_X86.exe Windows Embedded CE 6.0, X86 |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
1.30 | * | WinXP, WinCE5x, WinXPe, WinXP+SP2, WinCE6x, WES2009, Win7/32bit | 12.04.2011 | 552 KB | ZIP | B_R_HMI_Diagnostics_V1.30.ZIP |
Popis |
HMI Diagnostics Utility B&R HMI Diagnostics analyzes your device and creates a report file. This report can be used for error diagnosis. B&R HMI Diagnostics supports different operating systems. Make sure to use the correct binary file: BrHmiDiag.exe Windows desktop operating systems like Windows XP, Windows Vista or Windows 7. BrHmiDiag_CE50_ARM.exe Windows CE 5.0, ARM BrHmiDiag_CE50_X86.exe Windows CE 5.0, X86 BrHmiDiag_CE60_X86.exe Windows Embedded CE 6.0, X86 |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
1.20 | * | WinXP, WinCE5x, WinXPe, WinXP+SP2, WinCE6x, WinVista, WES2009, Win7/32bit, Win7/64bit | 21.09.2010 | 527 KB | ZIP | B_R_HMI_Diagnostics_V1.20.ZIP |
Popis |
HMI Diagnostics Utility B&R HMI Diagnostics analyzes your device and creates a report file. This report can be used for error diagnosis. B&R HMI Diagnostics supports different operating systems. Make sure to use the correct binary file: BrHmiDiag.exe Windows desktop operating systems like Windows XP, Windows Vista or Windows 7. BrHmiDiag_CE50_ARM.exe Windows CE 5.0, ARM BrHmiDiag_CE50_X86.exe Windows CE 5.0, X86 BrHmiDiag_CE60_X86.exe Windows Embedded CE 6.0, X86 |