New functions:

CAN IO update
It is now possible to make the hysteresis setting for analog input channels for the respective analog modules using the "Inhibit time" parameter.
SLIP support
Standard;The SLIP protocol is now available for RS232 interfaces on SG4 targets. This allows standard modems or ISDN cards to be used.
Maintenance edition
There is now a "maintenance edition" fo Automation Studio available whose "Build project" button has been disabled. Otherwise, full functionality is present.
Changing the CAN baud rate with CAN open
Calling the CANopen() function block from the CAN_Lib library now allows the CAN baud rate to be configured to a different value as specified in the configuration dialog box. This allows the baud rate to be changed later at runtime.


Revision History : See category "Revision History"

System requirements

Operating system
Windows XP (SP2 required for AS2.5.3, AS3.0.5x and higher)
Processor
At least Pentium II 400 MHz
RAM
At least 256 MB
Hard disk space
At least 600 MB free
Graphics
XGA (1024 x 768)
Internet Explorer >=6.0