BIOS Upgrade for 815E systems !!MANDATORY UPDATE!!


----------------------------------------------------------------
UPGRADE PROCEDURE
----------------------------------------------------------------

1. Extract the *.zip file and copy the files to a bootable disc.
2. Insert the disk into the floppy drive and reboot the APC620 /
PPC700.
3. After the reboot there will be displayed a bootmenu with
follow options:

1. Upgrade PHOENIX BIOS for i815E- BIOS will be upgraded.
(Default after 5 sec)
2. Exit - Exit to Shell (MS-DOS).

4. After successful upgrade the system must be reseted.


Contents
LIESMICH.txt 01.23 NEW
README.txt 01.23 NEW
CONFIG.sys 01.23 NEW
AUTOEXEC.bat 01.23 NEW
PHLASH16.exe 01.40
1BR1R123.wph 01.23 NEW
BRBIOSID.exe 01.00 NEW

Change(s)
- Scan of BIOS ID implemented to avoid the update with a "wrong" BIOS version.
- Bugfix: Recovery Mode (Crisis Update Mode) was not working with the internal USB-HUB from SMSC.
- Bugfix: ESCD area was not working since BIOS R115.
- Bugfix: If the PXE boot (ETH1) is enabled in BIOS and a optional 5ACPCI.RAIC-00 is plugged in the system, the BIOS detects a resource conflict during the boot.
- Bugfix: When the summary screen is shown during the boot and a key is pressed and the PS/2 mouse is "Enabled" in BIOS but not connected on the system, the PS/2 keyboard was not working.
- Bugfix: In very rare cases it could happen, that the system shows a cyclic beep during the POST, but the boot was OK.
- Update for the IDE core from Phoenix.
- Update for the USB core from Phoenix.