----------------------------------------------------------------
UPGRADE PROCEDURE
----------------------------------------------------------------

1. Extract the *.zip file and copy the files to a bootable disc or
e.g. USB Memorystick.
2. Insert the disk into the floppy drive and reboot the APC800 /
PPC800 (or boot from e.g. USB Memorystick).
3. After the reboot there will be displayed a bootmenu with
follow options:

1. Upgrade AMI BIOS for B945 - BIOS will be upgraded.
(5PC800.B845-xx) (Default after 5 sec)
2. Exit - Exit to Shell (MS-DOS).

4. After successful upgrade the system must be rebooted.
5. Press "Del" to enter BIOS Setup and load CMOS Defaults
after REBOOT. After this select "Save Changes and Exit".

----------------------------------------------------------------
Version 01.12 / 02.12.2008 !MANDATORY UPDATE!    
----------------------------------------------------------------

Contents
LIESMICH.txt 01.12 NEW
README.txt 01.12 NEW
CONFIG.sys 01.10
AUTOEXEC.bat 01.12 NEW
BRBIOSID.exe 01.00
XCPBSVC.exe 01.3.3
APC2R112.rom 01.12 NEW


Change(s)
- Adjustments and enhancements of the BIOS setup screens for
APC820.
- BIOS CMOS Profile 3 for APC820 implemented.
- Enhancements in the help for the BIOS setup node "USB Keyboard
Legacy Support" with a warning. This warning should be a sign
that with this option set to disable it is not possible anymore
to enter BIOS setup with a USB keyboard.
- The BIOS setup node "USB Legacy POST-Always" associated with
the BIOS setup nodes "Legacy USB Support" and "USB Keyboard
Legacy Support", to avoid a accidental lock out of the BIOS
setup.