----------------------------------------------------------------
UPDATE PROCEDURE
----------------------------------------------------------------

1. Copy all files to a bootable disk.
(Alternatively, a bootable CompactFlash card or a bootable SB stick can be used. Detailed information can be found in he PPC310 User Manual)
2. Insert the disk in a (USB) floppy drive connected to the Panel C 310 and re-boot the device.
3. A boot menu with following options is shown after booting:

1. Upgrade MTCX Firmware FPGA and PX32 (PP3F/PP3P)
The MTCX Firmware FPGA and PX32 will be upgraded utomatically (Default after 5 sec).

*************************************
Do not abort a MTCX Firmware upgrade!
*************************************

Otherwise the PPC 310 cannot be rebooted afterwards and must be sent to B&R for repair. Retry the aborted update process WITHOUT rebooting the Panel PC 310, for xample by directly calling batch file UPDMTCX.BAT.

2. Exit
Ausstieg in die Shell (MS-DOS).


4. Select the desired action.
5. Remove disk and reboot device (after successful update only!).

----------------------------------------------------------------
Version 1.04 / 2010-06-22 /
----------------------------------------------------------------

Contents:
0022#0.fp 01.03 NEW
0022#0.fw 01.05
AUTOEXEC.BAT
CONFIG.SYS
LIESMICH.TXT NEW
MTCXSVC.EXE 05.23 NEW
README.TXT NEW
UPDMTCX.BAT

Fixes:
- FPGA (0022#0.fp): Bugfix serial UART (COM1).
Faulty or missing TX data can sporadically occur, when using a high baudrate (e.g. 115200Baud).

Changes:
- MTCXSVC:
- Support for APC800 Series.
- Support for APC820 Series.
- Support for Display Inverter Update.
- Support for Atom N270 CPU der APC620/PPC700 Series.
- Support for Atom N270 CPU der APC800 Series.
- Support for PPC800 Series.
- Functional enhancements for PP300/400 and PPC300 series.