----------------------------------------------------------------UPDATE PROCEDURE
----------------------------------------------------------------

1. Copy all files to a bootable disk.

2. Insert the disk in a (USB) floppy drive connected to the Panel PC 310 and re-boot the device.

3. A boot menu with following options is shown after booting:

1. Update BIOS => default after 5 sec

The BIOS will be updated automatically.

***********************************************
Write down your BIOS settings before upgrading!
***********************************************

After a BIOS update the BIOS uses automatically the CMOS
default settings. If you have changed settings in the BIOS
Setup you must change these settings again after update!

***************************
Do not abort a BIOS update!
***************************

Otherwise the Panel PC 310 cannot be rebooted afterwards
and must be sent to B&R for repair. Retry the aborted
update process WITHOUT rebooting the Panel PC 310, for
example by directly calling batch file UPDBIOS.BAT.

2. Save BIOS (into directory SAVED)

The BIOS will be saved automatically in the directory
SAVED.

***********************************************************
There must be about 256 kbytes free space left on the disk. ***********************************************************

3. Exit

Exit to the Shell (MS-DOS).

4. Select the desired action.

5. Remove disk and reboot device (after successful update only!).


----------------------------------------------------------------
Version 1.02 / 2008-09-09
----------------------------------------------------------------

Contents:
0023#0.bio 1.05 NEW
LIESMICH.TXT 1.02 NEW
README.TXT 1.02 NEW
LXFLASH.EXE 3.02 NEW
AUTOEXEC.BAT
CONFIG.SYS
SavBIOS.BAT
UPDBIOS.BAT

Fixes:
- BIOS Setup:
- Incorrect assignment of following settings for the serial COM ports
Setup Allocation
3E8/IRQ4    -> 2E8/IRQ4    
2E8/IRQ4    -> 2F8/IRQ3
3E8/IRQ12-> 2E8/IRQ12
- Problem with "Wheel Mouse Optical USB" from Microsoft fixed.
Sporadically this USB mouse was not detected during bootup.

Changes:
- BIOS: Facilitating the entry into the BIOS setup pages, waiting
time for [DEL] entries increased to 500ms.
- BIOS: Optimizations for detecting several bootable USB devices
in combination with USB Media Drive (timeouts increased).
- BIOS: If the new BIOS detects differences in the CMOS structure
between former and new BIOS version, the BIOS will automatically
load the BIOS Setup defaults.
- LXFLASH.EXE: Newest version.