Industrial switching cabinet construction streamlines production cycles. Prefabricated cable trees make assembly easier and faster directly on the machine or system. The X20 System supports efficient prewiring of the entire switching cabinet using separate terminal blocks. The finished X20 System configuration is mounted in the switching cabinet and connected to the prewired cable trees.

The supply for the X20 modules, and if needed, the supply for sensors and actuators using three-wire technology do not result in additional energy distribution requirements. The X20 System reduces manual wiring to a minimum.

Simple, tool-free wiring for fast installation. The X20 System terminal blocks use a fully-integrated and proven push-in connector system.

The terminals can even accept double wire sleeves with a cross section of 2 x 0.75 mm². The user saves time wiring the system and distributing the signals.

Each wire connection can be removed with a screwdriver. Each terminal also has an access point for a measurement probe.

A great deal of thought was given to designing the X20 System. Right down to the wire connectors.